Commell MPX-3132 Uživatelský manuál

MPX-3132 User’s Manual Edition 1.1 2014/11/13

MPX-3132 User’s Manual 7 3. Click “Browse” and find your flash drive, choose your system type then click “OK”. 4. Finally, the hard

MPX-3132 User’s Manual 8 6. <SATA RAID Configuration> This MiniCard only supports the following configurations: RAID 0 (Stripping): Two hard dri

MPX-3132 User’s Manual 9 Contact Information Any advice or comment about our products and service, or anything we can help you please don’t hesitate

MPX-3132 User’s Manual Copyright Copyright 2014, all rights reserved. This document is copyrighted and all rights are reserved. The information in

MPX-3132 User’s Manual Index 1. <Product Specification & Packing List>...1 2. <Mechanical

MPX-3132 User’s Manual 1 1. <Product Specification & Packing List> General Specification Form Factor MiniPCIe Card Controller Silicon Imag

MPX-3132 User’s Manual 2 2. <Mechanical Drawing>

MPX-3132 User’s Manual 3 3. <Component Placement & Pin assignment> Connector: CN_SATA1/2 Type: DF14 10-pin pitch=1.25mm Pin

MPX-3132 User’s Manual 4 4. <BIOS Configuration> Attention! This setting is only relatively new motherboard needs! Models are as follows ATX: AS

MPX-3132 User’s Manual 5 3. Here it must be based on different boards to set the PCIe speed to "GEN1". So that it can detect the Mini Card.

MPX-3132 User’s Manual 6 5. <Install the operating system > 1. When you enter the partition screen, you will find no detect hard drive.