Commell LV-67D Uživatelský manuál stáhnout pdf (Strana 24)

LV-67D User’s Manual

22-

To setup the LCD, you need the component below:

1. A panel with LVDS interfaces.

2. An inverter for panel’s backlight power.

3. A LCD cable and an inverter cable.

For the cables, please follow the pin assignment of the connector to make a cable, because

every panel has its own pin assignment, so we do not provide a standard cable; please find

a local cable manufacture to make cables.

LCD Installation Guide:

1. Preparing the LV-67D, LCD panel and the backlight inverter.

2. Please check the datasheet of the panel to see the voltage of the panel, and set

the jumper JVLCD to +12V or +5V or +3.3V.

3. You would need a LVDS type cable.

4. To connect all of the devices well.

After setup the devices well, you need to select the LCD panel type in the BIOS.

For sample illustrator only

Panel side

Board side

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 50 51

Žádné komentáře

Commell LV-67D Uživatelský manuál Strana 24