Commell FS-977 Uživatelský manuál

FS-977 User’s Manual Edition 1.2 Copyright Copyright© 2002, 2003. All rights reserved. This document is copyrighted and all rights are reserved. T

Notes (This page left blank intentionally) FS-977 User’s Manual 10

’s Manual 11Chapter 2. Hardware Setup This chapter contains the information for installation of hardware. The install procedure includes jumper set

2.1.1 Jumpers Reference Jumper Function Section JRTC COMS Operate / Clear Setting 2.3 JWDT Watchdog Timer NMI / Reset Setting 2.4 JDOC Disk

2.1.2 Connectors Reference Internal Onboard Connector Connector Function CPU MicroPGA478 478 CPU Socket DIMM1/2 184-pin DIMM Socket IDE1/2 40-pin

2.2 CPU and DRAM Setting The board is based on Intel Socket 478 architecture, supports Intel mPGA478 Pentium 4 / Celeron CPU at 533/400 MHz FSB. The

2.4 Watchdog Timer Setting The watchdog timer makes the systems auto-reset while it stop to work for a period. The onboard watchdog timer can be set

2.5 Embedded Solid State Disk The board supports both 32-pin M-systems DiskOnChip 2000 and IDE-based DiskOnChip IDE Pro and DiskOnModule (DOM) embed

2.6 Power and Fan Connector JPS 131423123SYSFAN ATXREG 123CPUFAN Connector: ATXREG Type: 4-pin Standard Pentium 4 Additional +12V Power Con

2.7 VGA Interface The board is integrated with Intel 845GV GMCH built-in Intel Extreme Graphics with 266 MHz VGA core and Intel Dynamic Video Memory

2.8 Ethernet Interface The board integrated with dual Intel PRO/100+ Fast Ethernet interfaces at the type of 10Base-T/100Base-TX auto-switching Fast

Packing List Hardware FS-977 Single Board Computer ... X 1 Cable Kit 34-pin FDD Cable ...

2.9 Audio Interface The board integrates with AC97 3D audio interface by Intel ICH4 and codec, provides line-in, line-out, Mic-in and CD-in interface

2.10 Switch and Indicator JFRNT 2 1 14 13 Connector: JFRNT Type: onboard 14-pin header Function Signal PIN Signal Function Vcc (+)

Notes (This page left blank intentionally) FS-977 User’s Manual 22

Chapter 3. BIOS Setup The single board computer uses the Award BIOS for the system configuration. The Award BIOS in the single board computer is a

Notes (This page left blank intentionally) FS-977 User’s Manual 24

Chapter 4. Driver Installation The driver CD offers auto-run menu. It will detect and select the type of single board computer and helps you instal

Notes (This page left blank intentionally) FS-977 User’s Manual 26

Appendix. A I/O Port Pin Assignment A.1 IDE Port 2140 39 Connector: IDE1, IDE2 Type: 40-pin (2 x 20) box header Pin Description Pin Description

A.2 Floppy Port 12Connector: FDD Type: 34-pin (2 x 17) header Pin Description Pin Description 1 Ground 2 DRIVE DENSITY SELECT 0 3 Ground 4 DR

A.3 Parallel Port 1 14Connector: LPT Type: 26-pin box header Pin Description Pin Description 1 STROBE- 14 AUTO FEED- 2 D0 15 ERROR- 3 D1 16 INIT

Table of Content Chapter 1. Introduction... 5 1.1 Product Overview...

A.4 Serial Port A.4.1 Onboard RS-232C Serial Port 12Connector: JCOM1, JCOM2 Type: 10-pin header Pin Description Pin Description 1 DCD 2 RXD 3 TXD

A.5 USB Port 15Connector: USB1, USB2 Type: 10-pin (2 x 5) header for dual USB Ports 610 Pin Description Pin Description 1 Vcc 6 Vcc 2 Data0- 7 Dat

A.7 VGA Port 610123451112131415Connector: VGA Type: 15-pin D-sub female connector on bracket Pin Description Pin Description Pin Description 1 R

A.9 AT Keyboard Port 1 5Connector: JATKB Type: 5-pin box header Pin 1 2 3 4 5 Description CLK DATA N/C Ground Vcc A.10 PS/2 Keyboard and Mouse

Notes (This page left blank intentionally) FS-977 User’s Manual 34

Appendix B. Flash the BIOS B.1 BIOS Auto Flash Tool The board is based on Award BIOS and can be updated easily by the BIOS auto flash tool. You can

Notes (This page left blank intentionally) FS-977 User’s Manual 36

Appendix C. System Resources C.1 I/O Port Address Map Address Range Device 0060-0060 i8042prt 0064-0064 i8042prt 0170-0177 atapi 01CE-01CF

C.2 Memory Address Map Device Physical Address Length x00000000 - x0009FFFF System board extension for PnP BIOS x000A0000 - x000AFFFF Intel(R) 82

C.3 System IRQ and DMA Resource C.3.1 IRQ IRQ Number Device 0 System timer 1 Standard 101/102-Key or Microsoft Natural Keyboard 2 Program

Appendix B. Flash the BIOS... 35 B.1 BIOS Auto Flash Tool...

C.3.2 DMA Channel Device 0 (free) 1 (free) 2 Standard Floppy Disk Controller 3 (free) 4 Direct Memory Access Controller 5 (free) 6 (free) 7 (free

Notes (This page left blank intentionally) FS-977 User’s Manual 41

Contact Information Any advice or comment about our products and service, or anything we can help you please don’t hesitate to contact with us. We w

Chapter 1. Introduction 1.1 Product Overview FS-977 SBC (Single Board Computer) is an all-in-one industrial full-size PICMG (PCI/ISA)-bus CPU card b

1.2 Specification General Specification Form Factor Full-size PICMG-bus CPU Card / Slot PC PICMG version 1.0 (Rev. 2.0), PCI version 2.0 compliant C

Solid State Disk Interface Flash Type M-systems DiskOnChip 2000, DiskOnChip Millennium, IDE Pro and DiskOnModule (DOM) solid state flash disk Packag

Power and Environment Power Req. +5V, +12V, -12V DC input from PICMG backplane Additional +12V on 4-pin connector for Pentium 4 PSU ATX Function 3-p

1.3 Component Placement 2 x 184-pin DIMM SocketSystem Memory 2 GB DDR SDRAM Intel 845GV GMCH Built-in Intel ExtremeGraphics VGA Core DiskOnChip Soc